WARNING
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND
THE BLADE DURING ASSEMBLY OR AFTER INSTALLATION.
DO NOT INSERT OBJECTS IN THE PATH OF THE BLADES.
SAFETY RULES
The fan must be mounted with a minimum of 2.1 m (7 feet)
clearance from the trailing edge of the blades to the floor.
To operate the reverse function on this fan, press the
reverse button while the fan is running.
Avoid placing objects in the path of the blades.
WARNING: make sure the power is disconnected
before cleaning your fan.
To avoid personal injury or damage to the fan and
other items, be cautious when working around or
cleaning the fan.
Do not use water or detergents when cleaning the fan
or fan blades. A dry dust cloth or lightly dampened
cloth will be suitable for most cleaning.
After making electrical connections, spliced
conductors should be turned upward and pushed
carefully up into outlet box. The wires should be spread
apart with the grounded conductor and the
equipment-grounding conductor on one side of the
outlet box and the ungrounded conductor on the other
side of the outlet box.
Electrical diagrams are reference only. Light kits that
are not packed with the fan must be cULus Listed and
marked suitable for use with the model fan you are
installing. Switches must be cULus General Use
Switches. Refer to the Instructions packaged with the
light kits and switches for proper assembly.
All set screws must be checked, and retightened where
necessary, before installation.
The subject fan weight information is as below:
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Model
300044
300048
Net Weight
(kgs)
Gross Weight
(kgs)
Net Weight
(lbs)
Gross Weight
(lbs)
9.18
10.22
20.21
22.50
7.58
8.48
16.68
18.66
4 | KICHLER.COM
