Kichler Lighting 300457, Instruction Manual

ELECTRICAL CONNECTIONS

WARNING: 

To avoid possible electrical shock, be sure you have turned 

off the power at the main circuit panel.

Follow the steps below to connect the fan to your household wiring. 
Use the wire connecting nuts suppled with your fan. Secure the 
connectors with electrical tape. Make sure there are no loose wire 
strands or connections.

NOTE: 

The CoolTouch™ Control System is equipped with 16 possible 

frequency combinations to prevent interference from or with other 
remote control units. The frequency switches on your receiver and 
transmitter have been preset at the factory. Please recheck to make 
sure the switches on transmitter and receiver are set to the same 
position, any combination of settings will operate the fan as long as the 
transmitter and receiver are set to the same position. (Fig. 12)

Step 1. Insert the receiver into the ceiling mounting bracket with the 
flat side of the receiver facing the ceiling. (Fig. 13) For best 
performance, make sure the Black Antenna, on the end of the 
receiver, remains extended and not tangled with any of the electrical 
wires.

Receiver

Hanger
bracket

Code switch

HI

MED

LOW

FAN OFF

LIGHT

ON ECE

1 2 3 4

ON ECE

1 2 3 4

ON

Fig. 12

Fig. 13

52" LEEDS LED FAN    |   11