9
Fig. 17
12. INSTALLING THE LIGHT BULBS &
GLASS SHADE
1. Install 3, 40W candelabra bulbs (included).
2. Slip the beaded pull chain into the outside
hole in the glass shade then through the hole
on the side of the decorative glass cap.
3. Fit the decorative cap onto the light kit stem.
Feed the beaded pull chain from the light kit
stem through the hold in the decorative nut
and thread the decorative nut on securely.
DO
NOT OVER TIGHTEN.
4. Attache one pull chain fob to each of the
beaded pull chains. (Fig. 17)
Note:
Make sure to leave enough space
between the fan pull chain and the bulbs so
the chain doesn't rub against any of the bulbs.
Decorative nut
Glass cap
Glass shade
Bulbs
