52" Compass LED | 11
FINISHING THE MOTOR INSTALLATION
ATTACHING THE FAN BLADES
Step 3.
Step 3. Securely attach and tighten the canopy hole cover over the shoulder
Securely attach and tighten the canopy hole cover over the shoulder
screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig.17)
screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig.17)
NOTE:
NOTE: Before continuing, make sure the power is disconnected by turning
Before continuing, make sure the power is disconnected by turning
off the circuit breaker or removing the fuse at the circuit box.
off the circuit breaker or removing the fuse at the circuit box.
Step 1.
Step 1. Insert the blade through the slot on the motor housing, as shown,
Insert the blade through the slot on the motor housing, as shown,
secure with the screws and washers provided. Repeat process with the other
secure with the screws and washers provided. Repeat process with the other
blades. (Fig. 18)
blades. (Fig. 18)
Fig. 17a
Fig. 17b
Fig. 18
Canopy
Hole
Cover
Blade
