4
4
KICKBIKE WORLDWIDE OY
Mikkolantie 1 A
FI – 00640 HELSINKI
Tel. +358 (0)9 388 3013
info@kickbike.fi
www.kickbike.fi
Steering System
Steering System
Before riding your Kickbike, check for your own safety that all bolts in the headset
are properly tightened. Neither the stem, handlebar, nor bar ends should move
when turned manually.
Handlebar Stem
The adjustment range of the Kickbike Sport Classic is adequate for a wide variety
of Kickbikers. The height of riding pose is adjusted by changing the angle of the
stem.
Open the adjustment bolt under the stem, set the stem to the desired position and
tighten the bolt. After this you might have to adjust the brake levers so that you can
reach them with your fingers and adjust the bar ends to a comfortable position for
you.
Note that if the adjustment bolt is tight, then it is difficult to turn the screw on the
side of the stem that tightens it to the steerer.
Important ! The stem must not be raised higher than the line marked on its side.
Bar Ends
The bar ends attached to the handlebar of Kickbike Sport Classic and Millennium
Racer
ought to be adjusted so that their angle is a bit above horizontal. You can make
the grip narrower by simply moving the attachment point inwards.
Grip adjustment is important in order to ensure your shoulders and arms don’t
become tired. Many experienced Kickbikers use a shoulder-wide grip.
