3
Input Status:
Audio input status is indicated with one of three colored LEDs, located next to the
SOURCE/PAIRING
button. These LEDs will change color with the source:
Bluetooth - Blue
FM Radio - Red
Auxiliary Input - Green
Status Indicators
The KICKER Bullfrog uses light indicators to acknowledge changes in settings, modes,
and input response. If no action can be taken, such as decreasing volume when at minimum,
or pressing
FWD/BACK
while in AUX mode, there will be no response.
Battery Status:
Battery status is indicated with 5 white LEDs on top of the Bullfrog, above the
PLAY/PAUSE
button. These LEDs will also indicate Double-Kick mode (see
Page 4
). To show current battery
status, press any button while the Bullfrog is powered on. Status display will end after
5 seconds. Remember to charge the Bullfrog for 6 hours before fi rst use. Charging is complete
when Battery LEDs stop counting and turn off.
{
BATTERY STATUS LEDs (1-5)
All Solid
>80%
4 Solid
60%–80%
3 Solid
40%–60%
2 Solid
20%-40%
1 Solid
<20%
1 Blinking
<10%
Counting Up
Battery Charging
AUX
}
LED status indicators:
• illuminated when the Bullfrog is powered on
• solid when input source is set
• fl ashes blue when in Bluetooth pairing mode
• blinks when receiving commands
• breathes slowly when audio is paused or muted
