3
Radio Removal (Trucks with Console Mounted Shifter)
1. Set the parking brake.
2. Turn the ignition switch to the run position (do not start).
3. Shift the transmission to “Neutral”.
4. Lift up on the shifter bezel to remove. Fig. 1
5. Return transmission to park and turn ignition switch to off.
6. Open the hood, disconnect the negative battery cable
7. Pull loose the rubber tray above the radio and remove the two screws beneath it. Fig. 2
8. Remove the two screws on the top front of the console. Fig. 3
9. Remove the panel on both sides of the console by pulling it loose. Fig. 4
10. Remove the screw on each side of the console toward the front. Fig. 5
11. Slide both front seats all the way forward. (For trucks with power sliding seats temporarily reconnect the
negative battery cable in order to move seats.)
12. Remove screw on each side of the rear of the console. Fig. 6
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
