4
8. Using a panel removal tool gently pry up on the panel surrounding the shifter housing and
remove. Fig. 7
9. Using a panel removal tool gently pry out on the radio trim bezel. Fig. 8
10. Unplug the factory wiring on the radio trim bezel and remove.
11. Remove the four 7mm screws securing the radio.
12. Pull the radio from the dash and disconnect the wiring. Disconnect the antenna cable
by pulling the locking antenna connector away from the radio. Caution: Pulling the antenna
cable straight out of the radio without pulling on the locking antenna connector could
damage the cable or radio.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
