4
SoloX 18 Subwoofer
DISAS
SEMBL
E
Disassemble
1. Remove the (4) four acorn head
nuts and (8) eight bolts
securing the SPAIR to the BAM.
ATTENTION!
2. Install the Gap Cap into
the BAM around the
pole-piece to protect the motor
assembly from debris while
you are changing the SPAIR.
If any metal shavings or
pieces of speaker wire were to
fall into the gap, they would be
next to impossible to remove!
Please use the Gap Cap!
3. With the Gap Cap now
installed disconnect the
speaker wires from the SPAIR.
4. Discard damaged SPAIR.
The damaged unit does not
need to be returned to your
Authorized KICKER Dealer
or to KICKER (Stillwater
Designs) unless requested
to do so.
You might want to
hang it on your trophy
wall...all big game hunters
do this when they bag a 10
point.
Locator Pin
Locator Hole
Locator Pin
Locator Hole
