4
Do not install a port opening against a solid surface, such as an internal brace, back-panel or trunk wall,
seat or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest
dimension of the rectangular port as the minimum amount of space between the port opening and any
solid surface to insure unrestricted airfl ow.
If you prefer an ultra-smooth bass response, you should loosely fi ll your L7 enclosure with poly-fi l
stuffi ng. Ported designs will require covering the end of the port (located inside the box) with grill cloth,
chicken wire, or expanded metal to prevent the poly-fi l from exiting the port. The use of poly-fi l will slightly
decrease effi ciency, but will deepen and extend the low frequency output.
For more advice on box building, refer to your Authorized Kicker Dealer, or click on the Support tab on
the Kicker homepage,
www.kicker.com
. Please e-mail support@kicker.com or call Technical Support at
(405) 624-8583 for specifi c or unanswered questions.
Y
X
Z
D
D
D
Figure 3
Figure 4
D = 3” x 3” for L7S12, L7S15
D = 2” x 2” for L7S8, L7S10
SEALED ENCLOSURE APPLICATIONS
Model Volume
ft
3
(L)
Panel A in. (cm)
Panel B in. (cm)
Panel C in. (cm)
L7S8
.5 (14.16)
11X11 (27.9X27.9)
11x9.5 (27.9x24.1)
9.5x9.5 (24.1x24.1)
L7S10
1 (28.32)
13.5X13.5 (34.3X34.3)
13.5x12 (34.3x30.5)
12x12 (30.5x30.5)
L7S12
1.25 (35.4)
14.5X14.5 (36.8X36.8)
14.5x13 (36.8x33)
13x13 (33x33)
L7S15
2 (56.64)
16.5x16.5 (42x42)
16.5x15 (42x38.1)
15x15 (38.1x38.1)
Model Volume
ft
3
(L) Power
Handling
L7S8
.5 (14.16)
450W RMS
L7S10
1 (28.32)
600W RMS
L7S12
1.25 (35.4)
750W RMS
L7S15
2 (56.64)
1000W RMS
Model Volume
ft
3
(L) Power
Handling
L7S8
.75 (21.24)
450W RMS
L7S10
1.25 (35.4)
600W RMS
L7S12
2 (56.64)
750W RMS
L7S15
6 (169.9)
1000W RMS
Panel Dimensions for Minimum Sealed Enclosures using 3/4” (1.9cm) thick MDF (See
Figure 5
)
Sealed Minimum
Sealed Maximum
2017 L7 Rev F.indd 4
2017 L7 Rev F.indd 4
11/1/2016 4:13:30 PM
11/1/2016 4:13:30 PM
