6
If equipped, remove the larger module by snapping it out of the factory bracket.
Pull the factory module bracket from the metal and discard.
If equipped with two modules, slide the larger module into the relocation bracket first as shown in Fig 17
Using the supplied bolt and plastic fastener, install the smaller module over the top of the larger module as
shown in Fig 18
Note: The connectors on the smaller module face the opposite direction as the
connectors on the larger module. The smaller module mounts the same way
regardless of whether or not there is a second module.
Unscrew the jack tool-bag knob and remove the tool-bag. Fig 19
Remove the bolt indicated in Fig 19
Install the module relocation bracket as shown in Fig 20 and reinstall bolt.
If the vehicle is equipped with factory premium audio (Bose
®
),
locate the amplifier behind the jack mounting bracket. Disconnect
the connector indicated in Fig 21
Find the gray/black and blue/gray wire in the connector and install
the supplied wiretaps onto the wires. Connect the green wire of
the supplied adaptor harness to the blue/gray wire and the brown
wire of the adaptor harness to the gray/black wire.
Fig 17
Fig 18
Fig 19
Fig 21
Fig 20
