P40 Plasma Cutting Machine
2
|
P a g e
1.
Safety
Welding may damage your body or others, so please take protection measure
in operation
Only ones who are trained professionally can install , debug, operate, maintain
and repair the equipment.
Do not maintain and repair the machine when the machine is connected with power.
Electric shock can kill
Never touch electrical parts.
Wear dry, hole-free gloves and clothes to insulate yourself.
Insulate yourself from work and ground using dry insulation. Make certain the insulation
is large enough to cover your full area of physical contact with work and ground.
Ensure to install the equipment correctly and ground the work or metal to be welded to a
good electrical (earth) ground according the operation manual.
Ensure to operate the equipment in safe position.
Fumes and gasses can be dangerous
Welding may produce fumes and gases hazardous to health. Avoid breathing
these fumes and gases. When welding, keep your head out the fume.
Using enough ventilation and/or exhaust at the arc to keep fumes and gases away from the
breathing zone.
Welding sparks can cause fire or explosion
Remove fire hazards from the welding area. If this is not possible, cover
them to prevent the welding sparks from starting a fire. Remember that welding sparks
and not materials from welding can easily go through small cracks and openings to
adjacent areas.
Do not weld enclosed tanks or containers
Prohibit to use welder to unfrozen.
Have a fire extinguisher readily available.
Hot parts can lead to burn
