8
9
Assembly:
Install the steering wheel and dump lever
Assembly:
Make the one-time battery connection
❷
Tip
Remove the nut and bolt
before attaching the
steering wheel.
❶
❷
❸
❶ Attach the steering wheel
• Attach the wires coming
from the steering wheel
to the wires coming
from the steering column
• Completely align the holes
in the steering wheel with
the holes in the steering
column
• Insert the bolt through
the steering wheel and
fasten with the nut
❶ Remove the seat
• Loosen the two screws on the
seat and lift off to expose the
battery compartment
❷ Make the one-time battery
wire connection
• Attach the red wire
connectors
❸ Re-attach the seat
• Insert the tabs of the seat
into the seat slots and
tighten the screws
❷ Attach the dump lever
• Place the release lever
over the lever inset
inserting the peg into
the lever hole
• Insert the bolt through
the dump lever and
tighten
• Press the dump lever
cap into the dump lever
until it snaps into place
❷
❶
