background image

1

Thank you for purchasing a Kidde Fyrnetics alarm. 
Please read through our guide in full. 

This Kidde Fyrnetics CO Alarm is suitable as a single station and/or multiple station
device - up to 18 alarms. It is designed for residential premises only.

Carbon Monoxide alarm

Installer’s Guide

230V Interconnectable Mains Operated Alarm  with 

Rechargeable Lithium Ion Back Up 

423D/9HIR CO Alarm with digital display,  Peak level Memory and Smart Interconnect

423/9HIR CO Alarm with Smart Interconnect

The Owner’s Manual should be left in a safe place 

for the property owner. e.g. near Consumer Unit.

Kidde Safety Europe, Mathisen Way, Colnbrook, SL3 0HB, UK.

www.kiddefyrnetics.co.uk

© Kidde Fyrnetics 2005

Contents

Section

1.

Installation

Section

2.

Recommended Locations for CO  Alarms

Section

3.

Where not to install your alarm

Section

4.

Installing the Alarm

Section

5.

Battery Checking and Charging

Section

6.

Initial Checking and Testing of Alarm

Section

7.

Interconnect Wiring

Section

8.

Interconnecting with Kidde CO, Smoke and Heat Alarms

Section

9.

Timing of Installing

Section

10.

Decorating

Section

11.

Ongoing Maintenance

Section

12.

Repair/Servicing

Section

13.

Limitations of CO Alarms

Section

14.

Troubleshooting

Section

15.

Service and Guarantee

Section

16

Specifications

Environmental Protection

Waste electrical products should not be disposed of with household waste.  Please recycle
where facilities exist.  Check with Local Authority or Distributor for recycling advice.

Electrical rating 230V AC, 
50Hz 30mA max per alarm 
(maximum 30mA for originating unit 
with 18 alarms interconnected).

Lic No: KM 98848

EN50291:2001

2512-7205-01.qxd:_  2008.4.1  2:05 PM  Page 1

Summary of Contents for Fyrnetics 423/9HIR











Reviews: