background image

3.

2.

use the vehicle’s rear centre seat 

if the vehicle seat is fitted with a 

3-point adult belt).

•  Do not use your child car seat on a 

vehicle seat with lap belts only.

•  Your child car seat should not be 

purchased or sold as a second 

hand item.

•  Remove child out of the car as first 

priority in an accident.

•  While travelling it is recommended 

that any luggage or other objects 

liable to cause injuries in the event 

of a collision shall be properly 

secured.

•  Your child car seat should be 

securely belted to the vehicle, 

even when unoccupied because 

in a crash an unsecured child car 

seat may injure other passengers.

•  Please take a rest every two hours 

if you are travelling with a baby in 

the child car seat.

•  Please check the child car seat 

condition if you are going to travel 

a long distance with a child.

•  Please put all excess luggage 

into the boot of your car if you 

are going to travel with a baby, 

because loose items may hurt a 

baby when travelling on unstable 

roads or because they move 

suddenly when braking.

•  Please always check the child car 

seat before you place a baby 

into it.

•  Please get in touch with the dealer 

if anything breaks on the child 

car seat. Only the manufacturer 

or an authorised agent may do 

repairs. 

DO NOT

 try and fix the 

child car seat by yourself. It might 

be damaged or cause more 

damage.

Safety comes first

Vehicle seatbelt

The product must only be used with a 

3-point vehicle seatbelt that has been 

approved to ECE R16 or equivalent. 

NEVER use a 2-point seatbelt. Your child 

car seat can be fitted in most cars. 

However, some cars are designed so 

that proper installation is not possible. In 

this case, try another seat.

Vehicle seat travelling advice

In order to maximise the protection that 

the child car seat can give your child, 

please adjust the harness so that it fits 

snugly and make sure that the child car 

seat is fitted correctly.

Research shows that correct installation 

is the most important factor in child car 

seat safety.

Please take the time to read the 

instruction manual carefully.

Our product offers maximum 

protection when it is used in 

accordance with the instructions.

If you have any questions concerning 

the use of the product please do not 

hesitate to contact us.

•  This child car seat is designed for 

use for children whose weight is 

13kg or less and whose heights are 

66cm (26 inches) or less.

•  This child car seat must only be 

used in a rear facing position, 

and must 

NEVER

 be used forward 

facing. For maximum protection, 

the centre rear seat position (if 

it is fitted with an adult 3-point 

seatbelt) is recommended as the 

safest position in most vehicles for 

installing an child car seat. (Only 

Summary of Contents for KC18949

























Reviews: