Kiddicare Triple, Instruction Manual

Fitting and Removing the Front Wheels

fig. 13

fig. 14

fig. 15

Using the Front Swivel Wheels

To lock the swivel wheels, first ensure the front wheels are facing forward inline with the 

chassis, then lift the lever up (fig.16).

To put the wheels in swivel mode, push the lever down on the front of each front wheel

(fig.17 & 18).

fig. 16

fig. 17

fig. 18

Adjusting the Backrest

Applying the Brakes

fig. 19

fig. 20

Release

Lock

To lock the brakes fully, push down on each brake lever using your foot (fig.19).

To release the brakes, lift each brake lever using your foot (fig.20).

Apply the brake before putting your child into the pushchair.

Apply the brake when the pushchair is stationary.

To recline the backrest, press the button on the backrest release toggle and pull away 

from the seat to the desired height (fig.21).  Lower the seat to rest on the toggle (fig.22).

To put upright, grip the sides of the toggle with one hand, and the strap with the other 

hand and slide the toggle up the strap to the desired height (fig.23).

fig. 21

fig. 22

fig. 23

Press

Lock

Release

To fit the front wheels, push the wheels onto the front legs until they click into place 

(fig.13 & 14). 

To Remove, squeeze both clips, whilst pulling the wheel off the leg (fig.15).

6

7

www.kiddicare.com

www.kiddicare.com