To recline the seat rest
7. Lift the bar and raise or lower the seat to the desired
positions. There are three positions available.
Foot rest adjustment
8. Push the buttons on the side and raise or lower to
the desired position.
To open the canopy
9. The canopy can be pulled forward and pushed back
when not required.
To adjust and secure the harness (seat unit)
10. Push the buckle prongs in to the buckle housing
until they snap into position. Adjust sliders to ensure
a snug fit for your child. After making
adjustments to the seat always re adjust the
harness. Release the harness by pressing the button
on the buckle housing unit.
WARNING Always use the crotch strap in
combination with the waist belt.
To fold the jogger
11. To fold the jogger, slide the primary thumb lock to
side (A), squeeze the secondary lock trigger (B) and
then rotate the whole handle forward (C).
12. This will disengage the locks and you can now
lower the handle towards the ground.
Accessories
A raincover is supplied with this jogger. The raincover
should be placed over the hood. It should be folded
then placed in the basket when not is use
The foot rest has an optional flap that can be pulled
forward to create a cosy environment when the foot
rest is in the ‘up’ position. This creates a cosy
environment for small babies. This can then be
pushed back behind the footrest for when baby is
slightly older.
Fig. 9
Fig. 8
buckle
prongs
buckle
housing
sli
ders
B
C
A
Fig. 11
Fig. 12
Fig. 10
