A
B
Step 58: Attach Elbow Assemblies and TNR4 Slide
A:
Place TNR Brace centered over pilot holes of (570) TNR Ground Brace. Attach with 3 (S11) #8 x 2 Wood
Screws. (fig. 58.3)
B:
Place 1 TNR4 Post Mount Clamp on either side of the Clamp Ring so that the bent tops clip in behind the
Clamp Ring. (fig. 58.2)
C:
Insert the TNR4 Post Mount Base in between the 2 Post Mount Clamps and screw all pieces together using 1
¼ x 14.5mm Pan Head Bolt and Square Nylock Nut. (fig. 58.2)
D:
Attach TNR4 Post Mount Base to (571) TNR Upright, pre-drill with a 1/8” drill bit then attach with 2 (S6) #12 x
1” Pan Screws. (fig. 58.2)
E:
Attach the Post Mount Clamp to the clamp ring using 1 (S37) #7 x 5/8” Pan Screw. (fig. 58.2)
S11
570
100
A
TNR4 Post
Mount Base
TNR4 Post
Mount Clamp
S37
Square
Lock
Nut
S6
571
¼ x 14.5mm
Pan Head Bolt
Fig. 58.1
Fig. 58.2
Fig. 58.3
Hardware
2 x
#12 x 1” Pan Screw
3 x
#8 x 2” Wood Screw
1 x
#7 x 5/8” Pan Screw
Other Parts
2 x TNR4 Post Mount Clamp
1 x TNR 4 Post Mount Base
1 x 1/4 x 14.5 mm Pan Head Bolt
1 x Square Lock Nut
S6
S11
S37
A
103
Summary of Contents for Cedar Summit COPPER RIDGE PLAYSET
Page 111: ...NOTES ...
