52
Step 26: Lower Swing Wall Assembly
Part 1
A:
Place 1 (1808) Short Trim tight to the top of (1872) Ground flush to the outside edge of (1500) Post on the
Swing Wall side of the assembly. Attach to (1500) Post with 3 (S2) #8 x 1-1/2” Wood Screws. (fig. 26.1 and 26.2)
B:
Tight to top of (1872) Ground and tight to (1808) Short Trim attach (1852) CE Siding to both (1500) Posts with
2 (S0) #8 x 7/8” Truss Screws as shown in fig. 26.2.
C:
Tight to (1852) CE Siding and top of (1872) Ground attach 1 (1870) Trim Short to (1500) Post with 3 (S2) #8 x
1-1/2” Wood Screws. This will overhang the (1500) Post. (fig 26.2)
D:
Install 5 more (1852) CE Siding directly above the first, attaching to both (1500) Posts with 2 (S0) #8 x 7/8”
Truss Screws per board. (fig. 26.2)
E:
Tight to the top of both (1808) Short Trim and (1870) Trim Short and flush to the edges of both (1500) Posts,
attach (0839) CE Gap Board with 4 (S2) #8 x 1-1/2” Wood Screws. (fig. 26.2)
Hardware
Wood Parts
Fig. 26.1
Fig. 26.2
0839
1500
1870
S2
S2
S0
1872
1808
S2
S2
S0
Swing Wall Side
1852
S2
12 x
#8 x 7/8” Truss Screw
10 x
#8 x 1-1/2” Wood Screw
S2
1 x
CE Gap Board 1 x 4 x 38-3/4”
6 x
CE Siding 3/8 x 3-1/2 x 36”
1 x
Trim Short 1 x 2-1/2 x 19-5/8”
1 x
Short Trim 1 x 2 x 19-5/8”
0839
1870
1852
S0
S2
Will overhang
1808
1500
1500
x 6
x 6
