20
21
Your car seat is shipped with the LATCH belt routed
through the belt path. If LATCH belt is NOT currently
through the belt path, route the LATCH belt as described
below:
Routing LATCH belts:
Installation In Vehicle Using LATCH System:
1. Remove LATCH
connectors and lower
anchor belt from storage
location on bottom of car
seat.
- Press red release button
on LATCH connector to
remove.
2. With back of car seat
facing you, locate end of
LATCH belt with adjuster.
Thread LATCH connector
with adjuster through the
belt path opening on left
side of car seat
(Fig. 2)
.
3.
Pull LATCH belt across
back and out belt path
opening on opposite side
of seat
(Fig. 3)
.
Check that lower anchor
belt is not twisted.
Routing of LATCH lower
anchor belt is now
complete.
1.
Place car seat
forward- facing
in a seat location
equipped with LATCH
anchorage system.
(Fig 1)
.
See your vehicle
owners manual for
LATCH locations and
additional information.
If vehicle seat back is
adjustable, adjust into
upright position.
2.
Secure LATCH lower
anchor belt.
-Slide push-on
connectors onto the
vehicle lower anchor
on each side of car
seat. You should hear
a click when each
connector is securely attached to the vehicle lower
anchor.
(Fig. 2)
.
-Pull out on each connector to be sure it is locked
onto vehicle anchorage.
LATCH Lower Anchor Belt
Belt Path
Opening
LATCH
Lower
Anchor Belt
LATCH
Connectors
LATCH
Storage
Bars
Fig. 2
Fig. 1
Fig. 3
Fig. 2
Fig. 1
Toddler Seat Installation and Use
Toddler Seat Installation and Use
Summary of Contents for COMBINATION HARNESS TO BOOSTER CAR SEAT
Page 28: ...54 55 Notes Notes ...