Assemble the Corvette Race Car
1
1
.
Locate a wheel marked
“REAR”
.
Slide a wheel onto the axle with
“REAR”
facing toward vehicle. Fit
the wheel into the gear box.
NOTE:
For the rear wheels, a large
washer is
NOT
needed before sliding
a wheel onto the axle.
Then slide a wheel cover onto the
axle, fitting the three locating pins
into the holes.
2
2
.
Slide a small washer onto the axle.
Attach a nut onto the axle and
tighten snugly with the nut wrench
until you can see about two threads
on the axle. Do not overtighten.
Repeat steps 1 and 2
to attach the other
rear wheel.
Attach Rear Wheels
2a
６
