14
2
The straps attached to the seat can be adjusted to the height of the child so as to make the
child comfortable. Adjust the straps and make sure that the child is safe and comfortable
in the chair. Then fasten the harness to protect the child against slipping out of the chair.
To unfasten the harness, press the button on the buckle.
33
The chair can be turned into a low chair when you reduce the leg length by half. To lower
the height of the chair, unscrew the lower parts of all the legs and then put anti-slip covers
on the shortened chair legs.
4
To remove the straps, put the fixing elements which lock the straps in place through the
holes on the back of the backrest and under the seat. When your remove the straps, you
can also easily remove the covering from the seat.
SAFETY HARNESS
TRANSFORMING THE CHAIR
REMOVING THE STRAPS AND COVERING
ENVIRONMENT
For the sake of the environment, when you no longer use the product, dispose of it in a
suitable waste management facility in accordance with local law
CLEANING AND MAINTENANCE
•
This product requires regular maintenance.
•
It needs to be cleaned and maintained by an adult.
6
7
5
1. Press the lock release button and remove the locking elements on both sides of the
seat.
2. Press the lock release buttons on both sides of the seat at the same time and slide
the seat upwards to remove it from the base.
REMOVING THE SEAT
To do this, fix the column to the bottom of the table (Fig. 7.1) and then slip the table with
the column over the armrests, at the same time pressing the buttons on the bottom of the
table (Fig. 7.2). The buttons are used to unlock the fixing elements of the table in order
to fix it in place, remove it or adjust its distance from the child.
If necessary, the upper tray can be easily detached from the table.
NOTE:
Remember that the anti-slip column is just an additional protection. The basic
protection for a child sitting in the chair is a properly adjusted and fastened harness.
