background image

Commissioning

GLT-R003-2HDSATA

R

Page 2 / 12

4.75-10.003-11-EN | 2019-11-12

Important Information on Product Safety

Safety instructions

This data sheet contains information on installing and commissioning the product 
“GLT-R003-2HDSATA”. Each person who carries out work on this product must have read and under-
stood this data sheet. If you have any questions that are not resolved by this data sheet, you can 
obtain further information from the supplier or manufacturer.
If the product is not used in accordance with this data sheet, the protection provided could be 
impaired.
The applicable regulations must be observed when installing and using the devices. Within the EU, 
these include regulations regarding occupational safety and accident prevention as well as those 
from the VDE (German Association for Electrical, Electronic & Information Technologies). If the 
device is used outside of the EU, it is the responsibility of the plant engineer or operator to comply 
with local regulations.
Mounting, installation and commissioning work on the devices may only be carried out by qualified 
technicians. Qualified technicians are persons who are familiar with the described product and who 
can assess given tasks and recognize possible dangers based on their technical training, knowledge 
and experience, as well as their knowledge of the applicable regulations.

Symbol meanings

WARNING

Indicates a hazard of medium risk which can result in death or serious bodily injury if not avoided.

CAUTION

Indicates a hazard of low risk which can result in minor or medium bodily injury if not avoided.

!

CAUTION

Indicates a hazard which can result in material damage or malfunctions if not avoided.

NOTE

Indicates additional information that can simplify working with the product.

Notes on disposal

In accordance with the applicable laws and directives of the European Union countries, the product 
should not be disposed of with household waste. This ensures environmental protection and 
sustainable recycling or raw materials.
Commercial users should contact their supplier and observe the conditions of the purchase 
agreement. This device may not be disposed of together with other commercial waste.
The local and currently applicable laws must be observed.

Summary of Contents for GLT-R003-2HDSATA













Reviews: