17
Kielder WT Ltd
KWT-002-012-IMB22
Helpful Hints To Maximise
Performance
• Hold the wrench perpendicular to the
fastening (O) thus ensuring the flats of the
socket are in complete contact with the
fastening, facilitating the full transfer of
impact from the tool. By holding the wrench
in this way, all components can spin freely
around the central drive axis; important if
maximum performance is to be achieved
(P).
• Refrain from pushing the wrench onto the
fastening like you would when using a drill
(Q), hold the wrench securely in a neutral
manner without forward pressure. Forward
pressure onto the fastening can jam the
impact mechanism preventing effective
performance.
(O)
90º
(Q)
(P)
How To Use The Belt Hook
WARNING
• Always attach the belt hook
securely to the main unit with
the screw (Q) fastened firmly in place. If the
belt hook is not attached to the main unit,
the hook may disconnect. This may result in
an accident or injury.
• Regularly check the screw for tightness.
Tighten firmly if it appears to be loose.
• Ensure that the belt hook is attached
securely onto a waist belt or other belt. If
the unit slips off the belt, it may result in an
accident or injury.
• When using the belt hook, avoid running or
jumping with it as this may cause the hook
to slip and the main unit to fall.
• Remove hook when not needed to prevent
unintentional catching/snagging.
(R)
Maintenance
• This tool requires no major additional
lubrication or maintenance, only to keep
the tool in a good clean condition.
• Use only a dry soft cloth or brush for
cleaning the tool or a gentle flow of
compressed air. Do not use a damp cloth,
thinner, benzene etc or other volatile
solvents for cleaning.
• If the inside of the tool or battery pack is
exposed to water, drain and allow to dry
thoroughly as soon as possible. If you
experience any problems when operating
the tool, contact Kielder WT.
