4
KWT-002-012-IMB22
Kielder WT Ltd
WARNING!
This product uses Lithium
Battery cells, do not use if
the battery has been damaged in transit
or becomes damaged during use. If
Lithium-ion cells are damaged they
present a flammable hazard.
General Safety
Warning: when using electric tools, basic
safety precautions should always be
followed to reduce the risk of fire, electric
shock and personal injury. Please read all
of these instructions before attempting to
operate this machine. Save this manual for
future reference.
• Keep work area clear. Cluttered work
areas invite accidents.
• Consider work area environment. Do not
expose tools to rain. Do not use tools in
damp or wet locations. Keep work area
well lit. Never use tools near flammable
liquids or gases.
• Protect yourself against electric shock.
Avoid body contact with earthed or
grounded surfaces.
• Keep other people away. Do not let
others, especially children, come close
to the work, and touch the tool or power
cable. Keep them away from the work
area.
• Store idle tools. When not in use, tools
should be stored in a dry locked-up
place, out of children’s reach.
• Never force the tools. Your tools will be
more efficient and safer when used at the
rate for which they were intended.
Personal Safety
• Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, hearing
protection, anti-vibration gloves used
for appropriate conditions will reduce
personal injuries.
• Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your
finger on the switch or energising power
tools that have the switch on invites
accidents.
• Remove any adjusting key or wrench
before turning a power tool on. A wrench
or a key left attached to a rotating part
of the power tool may result in personal
injury.
• Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in
unexpected situations.
• Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
• If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
