6
KWT-002-012-IMB22
Kielder WT Ltd
• Wear ear protectors.
Exposure to noise can
cause hearing loss.
• Wear eye protection to
protect from loose particles
which may be thrown up
by the impact motion of
the tool.
• Wear a dust mask if the
work creates dust.
• Wear anti-vibration or
vibration asborbing gloves.
• Apply the power tool to the fastening
only when it is switched off. Rotating tool
inserts can slip.
• The torque depends on the impact
duration. The maximum torque is
achieved from the sum of all individual
torques achieved through impact.
• If accurate torque is required check the
fastening with a torque wrench.
• When storing or carrying the tool the
Forward/Reverse lever should be set to
the centre to lock the trigger and prevent
the tool being started accidentally.
• Hold the machine with a firm grip. High
reaction torque can occur while driving in
and loosening fastenings.
• Secure the workpiece. A workpiece is
held more securely in a vice than by
hand.
Additional Safety & Working
Instructions
• Always wait until the tool has stopped
completely before setting it down.
• DURING USE DO NOT TOUCH THE
METAL SQUARE DRIVE PART OF THE
WRENCH OR ANY OF THE METAL
CASING ON THE FRONT PART OF THE
TOOL. Hold power tools by the insulated
gripping surface as the tool may contact
hidden wiring when working into areas
such as walls or floors. Contact with a
‘live’ wire will make exposed metal parts
of the tool ‘live’ and shock the operator.
• Be aware that this tool is always in an
operating condition as it does not have to
be plugged into an electrical socket.
• When working into walls or floors, live
electric wires may be encountered. Hold
the tool only by the rubber handle to
prevent an electric shock in case you
encounter a live wire.
• DO NOT operate the Forward/Reverse
lever when the trigger switch is on. The
battery will discharge rapidly and may
damage the tool.
• During charging the charger may become
slightly warm. This is normal. DO NOT
charge the battery for a long period.
• When storing or carrying the tool, set
the Forward/Reverse lever to the centre
(switch lock).
• Do not strain the tool by partially
depressing the speed control trigger so
that the motor stops.
CAUTION!
This product is powered
by a rechargeable
battery system, please
pay attention to these additional
instructions:
