KIKKA BOO SKY HIGH, Instructions For Use Manual

WARNINGS

• Please read this manual carefully before using, please properly kept for future reference, and if the transfer of product delivery please send instructions. 

• If not according to the manual operation, may affect the safety of the baby. 

• Baby when using chairs, guardians shall not be allowed to leave.   

• This product is suitable for  age 6 -36 months.  

• Such as eat chair anywhere there is broken, torn or missing, please do not use.  

• Ensure that all users are familiar with the product operation method, ensure that the product can easily open and close, if not please do not forcibly operation, please read 

the instructions carefully, and use the right method. 

• Use of highchair, please read all parts installation and fine adjust right, make sure all the lock position is locked.

• Children ride, seat belts must be used to prevent the baby fall or slip out from the high chair, causing serious damage. 

• When your baby can't sit up their own, please do not use this product.When your baby in the chair, please do not remove any parts of tables and chairs or adjust any other 

part of the chair.     

• Don't let your baby climbing, playing alone or hanging on the chair.This product can only be used when on a flat, stable ground. At the same time, please do not place 

heavy objects on plates, in case of eat chair turn to.

• Avoid placing chairs near the heat source, such as electric heaters, gas heating lamp, or any place to let the baby contact with dangerous goods. 

• Before use, be sure to remove all the plastic bags and packaging materials, in order to prevent the baby in danger of suffocation.  

I. PARTS LIST

1. Dinner plate x1; 2. Pedal x1; 3. Seat x1; 4. Non-slip mat x4; 5. Aluminum Tube x4 (Mark NO.1); 6. Aluminum Tube x4 (Mark NO.2); 7. Aluminum Tube x4 (Mark NO.3);

8. Aluminum Tube x4 (Mark NO.4); 9. Aluminum Tube x4 (2 Mark L); 10. Gasket x4; 11. Nut x4; 12. Screw x4; 13. Safe Belt x1;

II. FOOT TUBE INSTALLATION AND FIXATION  

Remove products from the packing, please properly handle bags  will high chair backrest find good position stable on the whole.Take out the tube feet, first install four feet 

above the tube (tube at the top of the foot marked with Numbers 1, 2, 3, 4, please insert in order, with your fingers and hold feet on metal dots on the tube, and then aim 

at the hole under the chair, directly inserted until metal buckle point and holes overlap. Insert according to the position as shown in figure .

III. Take out the remaining four foot tube, foot tube bottom marked with the letter L for the back foot tube, no mark for the front foot tube, and find a good place to put the 

dining chair. Press the metal point on the foot tube with your finger, then aim at the hole under the foot tube of the highchair and insert directly until the metal point 

overlaps the hole as shown in figure .The following four foot tubes are exactly the same in style and mounting.

IV. INSTALLATION AND FIXATION OF  BASE

Remove the four footpads of the highchair from the packing case. Place the highchair on the ground, first press the metal point on the foot tube with your finger, then aim 

at the hole of the foot pad, and directly insert until the metal point and hole overlap and buckle.

V. INSTALLATION AND FIXING OF PEDALS 

Remove the pedal and screws tool from the package. Install the high chair on the ground, insert the screw into the hole and tighten with a screwdriver, as shown in the 

figure.

VI. INSTALLATION AND FIXING OF LEATHER CUSHION 

Put the leather cushion on the seat can be.

VII. INSTALLATION OF SEAT BELTS 

Press the two tongues of the belt buckle to unfasten it.

VIII. INSTALLATION OF SEAT BELTS 

Safety rope through two ways of eat chair .Safety rope wear into the can in two ways, will be subject to the baby comfortable.

IX. INSTALLATION OF SEAT BELTS

Run the belt through the openings of the dining chair. For more convenience, there are two ways to fit the belt.

X. INSTALL AND FIX THE TRAY

Place the plate, insert it into the corresponding hole and fold it down. The hole is divided into two gears, which can be adjusted according to the size of the baby's body 

shape.

XI. MAINTENANCE AND CARE

• The plastic and metal parts must be cleaned with a damp soft cloth and dried with dry soft cloth. 

• Do not let the product exposed to the harmful effect of external factors - direct sunlight, rain, snow or wind. This may lead to damage of the metal and plastic parts and 

fading of the fabrics of the crib. 

•  When you are not using the product, store it at a dry and well ventilated place, not in dusty, humid premises with very high or very low room temperatures. 

From time to time check all plastic parts that are hanged on the frame. Tighten all screw and bolts if necessary.

• Cleaning the cushion: Unfasten the safety belt. Wash it with warm water and dry it to avoid exposure under high temperature.

• Do not use bleach and strong acid/base liquid for cleaning the chair frame. Avoid contact with water in hardware parts, as corrosion will affect the service.

ENGLISH