18
PMC-A
1.3
Features
●
Digital display on both voltage and c
u
rrent at the same
time.
The PMC-A series power supply has two bright LED meters
that display the output voltage, output current, and their set-
tings.
●
High-resol
u
tion setting for o
u
tp
u
t voltage and c
u
rrent.
The variable resistors for the output voltage and current set-
tings are 10-turn wire wound type, allowing high-resolution
settings.
●
O
u
tp
u
t O
N
/OFF by external contact
The output ON/OFF switch is an electronic switch that emits
no chattering or noise. The switch can also be controlled
remotely.
●
External Remote Control
The output voltage and current can be controlled remotely
using an external analog signal (voltage or resistance). By
connecting a power supply controller such as KIKUSUI's
PIA3200 or PIA4810 via the GPIB interface, the PMC-A
series power supply can be integrated into a system such as
an automated test system.
●
External monitor f
u
nction
The monitor output enables to monitor the status output, out-
put voltage, and output current from outside of the PMC-A.
●
Remote sensing f
u
nction
The remote sensing function stabilizes the output voltage
across the load. (equipped with 18 V, 35 V models)
●
Eq
u
ipped with overvoltage protection (OVP) f
u
nction
as standard.
• To control the PMC-A series power supply using
KIKUSUI's PIA3200 (via the GPIB interface), the ROM
version of the PIA3200 must be 1.03 or later. If not, the
