TOS9213S/ TOS9213AS
1-7
■
Saving 100 test conditions for each test
One hundred test conditions, such as the test voltage, judgement value, and test
time, can be set and named for each test of the DC withstanding voltage, and insula-
tion resistance. For example, the name of the applicable safety standard and the
shipment destination of the DUT can be saved. Even when a change is made to the
destination of a product or the name of the applicable safety standard, there is no
need to change the preset test conditions. To recall these test conditions, simply set
the memory number. If such test conditions have their own name, they can be con-
firmed using that name. Test conditions can even be recalled from outside.
■
Programmed test conditions
By configuring the test conditions saved for each test, 100 test steps can be per-
formed consecutively.
When used together with the earth continuity tester TOS6200, the tester integrates
the test conditions saved in the earth continuity tester to perform continuous tests.
Tests can be performed easily, such as on the insulation resistance, DC withstanding
voltage, and earth continuity, in that order.
Up to 500 steps can be configured, with 100 programs storable, permitting recalls
even from outside.
■
Remote-control function and signal output function
Used exclusively for options, the DIN connector on the front panel enables the
remote control of start/stop operations, like its conventional counterpart. Using the
SIGNAL I/O connector on the rear panel, start/stop operations can be conducted and
the panel memory or program memory can be recalled.
Seven signals are output by the open collector through the SIGNAL I/O connector –
H
V
ON, TEST, PASS, UPPER FAIL, LOWER FAIL, READY, and PROTECTION.
These signals can be used together with the remote-control function to automate
testing and save labor.
•
This tester handles a high
v
oltage of 10 k
V
DC. Therefore, do not to
u
ch the
DUT or ca
b
les, as electric shock may res
u
lt.
Aro
u
nd the DUT, pro
v
ide f
u
ll safety meas
u
res s
u
ch as an enclos
u
re to
keep
w
orkers a
w
ay. In addition, to ens
u
re safety, exercise extreme care to
pre
v
ent the o
u
tp
u
t of a high
v
oltage d
u
e to improper connections and oper-
ations.
WARNING
