Page 3 of 9
Killion Industries, Inc. • 1380 Poinsettia Ave., Vista, CA 92081
Phone (760) 727-5102 • Toll Free (800) 421-5352 • Fax (760) 727-1622
www.killionindustries.com • Sales@killionindustries.com • Parts.Service@killionindustries.com
Refrigerated Display w/ High Volume Condensate Pump
1.
Move the refrigerated merchandiser into desired position.
2.
Attach the disconnect fitting (supplied by Killion Industries) to the end of the drain line
coming down from the ceiling.
3.
Locate the flex tube from the high volume condensate pump with the disconnect
fitting attached. Screw this into the fitting attached to the store drain line from the
ceiling.
4.
Plug the display case into the store power supply. Twist to lock the plug to the
receptacle.
5.
Locate the power switch at the top of the case in the compressor area and switch it to
“ON”.
6.
Let the refrigerator run for at least four hours to allow the merchandiser to cool and the
temperature to stabilize.
7.
Once the case is cool and running, it can be stocked with merchandise.
INSTALLATION
