4.4. Suitable Installation Locations
The HAB™ should be installed high enough above the floor to allow the battery cables to
bend without kinking and allow easy access to the knockouts on the bottom of the HAB™ .
There should be about 8 inches (approx. 200 mm) of clearance on both sides.
Observe the following:
• Install indoors in a cool, dry, ventilated space
• Do not install near a heat source, and keep away from direct sunlight; this prevents from
derating the output or shutting down due to overheating
• Keep away from fire, flammable, or explosive items
• Keep out of the reach of children and animals
• Do not install near a transformer or any other strong electromagnetic field. Strong electro-
magnetic fields can disrupt the HAB™ communication system
Choose a wall capable of supporting the full weight of the HAB™ (over 300 lb) with one or more
of the following characteristics: wood studs at regular intervals, plywood sheeting at least ¾ inch
thick, solid concrete or masonry, or metal studs of at least 18 gauge.
The HAB™ communication and power cable entries are located at the bottom right corner of the
unit. There must be enough clearance for the conduit and fittings.
This manual
is f
or
use b
y qualified personnel
onl
y
JUNE 2022 / Rev: 1.0
2022
19
