background image

 

Safety Instructions 

WARNING!

 

This section provides important safety and operating instructions. Any improper use of the 
system can result in serious injury and possibly death in extreme situations. 
 

CAUTION 

Check with manufacturer of medical devices before powering any life-support systems or other 
medical equipment to ensure they are compatible with the power supplied by this system. 
 

CAUTION 

Check with tool and/or equipment manufacturer before powering any of their products with this 
system to ensure they are compatible with the power supplied by this system. 
 

1. Before using your unit, read ALL instructions and information in this user manual.  
2. To prevent overheating, provide a minimum of 6 inches of clearance on all sides of the 

unit. Take special care not to cover or obstruct the cooling fan or exhaust vents located 
on each side. 

3. When using this unit outdoors, maintain the 6-inch clearance. Shelter the system to 

prevent rain, snow, dust, dirt, loose debris and other particles from entering the system. 
Such particles present a fire hazard. 

4. You may simultaneously connect up to 2 DC loads and up to 2 AC loads as long as they 

are within the Output Ports specifications. 

5. To reduce the risk of electrical shock while cleaning the unit, disconnect all inputs and 

power off the system. SWITCHING OFF ALL POWER DISCHARGE PORTS WILL NOT 
ELIMINATE RISK. TURN OFF MAIN POWER SWITCH. 

6. Inspect all power cords and connectors before attempting to connect them to your 

system. If cords are frayed, burnt, or otherwise damaged, DO NOT connect the cord to 
your system. Using damaged cords or connectors increases the risk of fire and electrical 
shock.  

7. DO NOT use if your unit has been dropped or damaged in any way. If unit is damaged, 

contact us for next steps 

8.

DO NOT attempt to disassemble the system. There are NO serviceable parts in the 

unit, and opening the system can expose the user to internal components that could 
cause severe injury or death. Opening the system is very dangerous and WILL VOID 
THE WARRANTY.  

9. Repairs should be done ONLY by a qualified repair technician. 

 

 

KiloVault LLC - 330 Codman Hill Road - Boxborough, MA 01719 - https://kilovault.com/ - (888) 218-5924 

Summary of Contents for RES-Q


















Reviews: