Centauri Energy Server
–
User Manual Model Number -GF-80000-360Vdc-380Vac-3/3
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
14
3.1.1 Panel Operation:
The display supports two types of control modes, i.e. button control and touch control. Default
setting is touch screen input mode.
Symbols / icons
/ESC
Function 1
Switch
Page up
Page down
Enter
Function 2
Exit
Move left
Move right
Enter
Table 1 Symbols Representation
Carry out corresponding operations by tapping icons on the LCD screen directly.
Symbols / icons
Function
Press ESC button alternatively in any interface to switch to button control/ touch
screen control mode.
Press Up and Down buttons to move the cursor.
Press the Enter button to execute an operation.
Table 2 Symbols Function
Button symbols
Names
Function
INV ON
Power ON button
INV ON button is used to execute Power On command.
After pressing this button, press the Enter button to
confirm the operation. System will start running.
INV OFF
Power OFF button
INV OFF button is used to execute Power Off command.
After pressing this button, press the Enter button to
confirm the operation. System power will turn Off.
SILENCE ON/OFF Alarm sound ON/Off
SILENCE ON/OFF button is used to turn ON / Off Energy
Server alarm.
FAULT CLEAR
System faults clear
FAULT CLEAR button is used to clear abnormal
commands and to restart the Energy Server.
EPO
Emergency power
Off
EPO button is used to terminate power supply
immediately.
Table 3 Front Panel Buttons Function
