Centauri Energy Server
–
User Manual Model Number -GF-80000-360Vdc-380Vac-3/3
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
26
4.3 Unpacking and Content Check:
1.
Centauri Energy Server
2.
SNMP Card
3.
RS232 Communication wire
•
When unpacking the Energy Server, please make the inspections as follows:
•
Make a visual inspection to make sure whether there is no deformation, damage and dislocation
or other damage in transportation on the internal or external surface of the Energy Sever and the
battery. If there is any damage, do not install or use the system, please notify the carrier for
disposal immediately.
•
Check the technical data sheet of the product to confirm whether it is the right equipment. The
technical data sheet of the Energy Sever is located on the label in the internal side of the front
door, with the model, capacity and main parameters of the Energy Sever indicated on the label.
Note:
Due to the weight, please keep the cabinet vertical to the ground during
disassembly or transportation. The tilt of the cabinet must not exceed 10 degrees
(difference from the vertical line), otherwise the cabinet may turn over.
2
1
3
