Sirius Capacitor Module
–
User Manual
Model Number -7100-48-B-2C-M-SD-A-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
23
•
Connect the
positive (+)
of the
F12 Terminal
of all Modules.
•
Connect the
negative (-)
of the
F12 Terminal
of all Modules.
•
Take out the output positive and output negative from the respective common point.
6.2 Series Connection of Sirius Modules:
A maximum of 8 Modules can be connected in Series with a Module Combiner.
•
Steps to Connect Modules in Series:
Refer to the Series combination of the Sirius Modules as shown below and make your connection accordingly.
•
Connect the
negative (-)
of the
F12 Terminal
of the first Module with the
positive (+)
of the
F12 terminal
of the next Module.
Note!
Switch ON only the Circuit breaker when connecting in Parallel.
Caution!
Charge all the Modules to 100% SOC or same voltage level before
connecting them in Parallel.
