Sirius SD Logger
–
User Manual
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
8
1.
SWITCH:
Push Button is used to switch ON or switch OFF the data logging.
Power ON:
Press and hold push button for 1 second, the LOG Status LED will turn Green. This means
that SD logger has started logging data each and every minute from Sirius Module.
Power OFF:
Press and hold push button for 5 seconds, the LOG Status LED will turn OFF and buzzer will
give alarm for 5 seconds. This means that SD logger has stopped logging data.
2.
Power Status:
Power Status LED indicates the status of input voltage of SD logger from Sirius Module.
Color
Status
Indication
Red
OFF
There is no input voltage of 48 Vdc from Sirius
Module to SD Logger.
Red
ON
There is input voltage of 48 Vdc from Sirius
Module to SD Logger.
3.
LOGGING Status:
Logging status LED indicates status of logging data.
Color
Status
Indication
Green
ON
Data logging has started.
Green
OFF
Data logging has stopped.
