Sirius SD Logger
–
User Manual
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
9
4.
COMM Port:
COMM Port is used for communication between SD Logger and Sirius Module. SD logger logs data every
1 minute from Sirius Module. COMM Status LED of Sirius Module will start blinking whenever it will send
or receive data from SD logger.
•
Connect one end of USB cable to the COMM Port of SD logger and the other end to the COMM Port
of Sirius Module.
Note:
Do not plug out the cable from Comm port while it is communicating with Sirius Module.
5.
Native Port:
Native port is used to set time and date of Sirius Module in the beginning. Once time and date are set,
you can plug out the cable from this port.
•
Connect one end of USB Cable to the Native port of SD logger and the other end to the USB port of
PC.
•
Double click the SIRIUS SD Logger Time Setter to execute it.
•
A log-in Screen will appear as shown below.
