Tables Assembly Instructions
Aspire
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Care.
Part No. 1741509 Revision A-05
Page 2 of 5
Installation (continued)
3. Begin on the frame side of the first gear(s) to be replaced.
If the frame utilizes the “bayonet” style frame lock (with
orange button), it must be removed first to expose the
screws beneath it. (Figure C). Save all screws that attach lock
mechanism to rails. Remove and save all screws and washers
holding center “heart” mechanism and cable bars in place.
(Figure D).
4. Pull both rails loose and pivot them away from the center.
(Figure E).
5. Use an Allen Wrench to remove both set screws from the
bottom of the chrome-finished “heart”. Retain the set
screws. (Figure F).
Figure D
Figure F
Figure C
Figure E
Remove locking
mechanism
(if applicable)
Loosen rails and
rotate to side
Remove and
save screws
and washers
Remove
“heart”
set screws
Remove inner
machine screw
Caution: End of bar
will be loose when
outer machine screw
is removed.
Remove outer
machine screw
Remove lock
mechanism
Roller Bar
Chrome-finished “heart”
