Alterna
™
2
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Customer Care.
Part No. 3073966 Revision
-
Assembly Instructions
Keyless Lock Programming
Tools Required
•
Pencil
•
Paper Clip
Figure A
Figure B
Figure C
Supervisor Code
•
Press and hold the receiver learn button until the yellow
LED begins a
two blink
pattern… then release.
(Figure A).
•
Enter the current supervisor code and press the unlock
button. Wait for the green transmitter light to go out.
(Figure B).
Default supervisor code is
071856
.
•
Enter the new four to eight digit supervisor code and
press the lock button. Wait for green transmitter light to
go out.
(Figure C).
•
To confirm, re
-
enter the new supervisor code & press
lock button.
•
If successful, the green LED on the Receiver Latch will
light and learn mode will be exited.
(Figure D).
•
Test new supervisor code before locking cabinet.
Make sure to record new supervisor code in a safe
place.
Figure D
LEARN
BUTTON
LED
TRANSMITTER
LIGHT
TRANSMITTER
LIGHT
LED
