Alterna
™
3
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Customer Care.
Part No. 3073966 Revision
-
Assembly Instructions
Keyless Lock Programming
Tools Required
•
Pencil
•
Paper Clip
Figure A
Figure B
Figure C
LEARN
BUTTON
LED
TRANSMITTER
LIGHT
Figure D
TRANSMITTER
LIGHT
LED
User Code (Non Single Use Mode)
•
Press and hold the receiver learn button until the yellow
LED begins a
one blink
pattern… then release.
(Figure A).
•
Enter the current User code and press the unlock button.
Wait for the green transmitter light to go out.
(Figure B).
Default user code is
0000
.
•
Enter the new four to eight digit user code and press the
lock button. Wait for green transmitter light to go out.
(Figure C).
•
To confirm, re
-
enter the new user code & press lock but-
ton.
•
If successful, the green LED on the Receiver Latch will
light and learn mode will be exited.
(Figure D).
•
Test new user code before locking cabinet. Make sure
to record new user code in a safe place.
