Kimo 23802 Instruction Manual Download | Manualshive

Page: 12 / 14

background image

When the tool/battery is overheated, the tool stops automatically. In
this situation, let the tool/battery cool before turning the tool on
again.

Overdischarge protection

When the battery capacity is not enough, the tool stops
automatically. In this case, remove the battery from the tool and
charge the battery.

INDICATING THE REMAINING BATTERY CAPACITY

Battery Pack LED Indicator

KIMO battery packs include a fuel gauge which consists of four LED
lights that indicate the level of charge remaining in the battery
pack.The fuel gauge is an indication of approximate levels of charge
remaining in the battery pack according to the following indicators:

NOTE:

1. Tap the battery indicator button to indicate the remaining

battery capacity and automatically turn off after 5 seconds. 2. When
charging, 4 LED Lights blink in sequence, and the LED lights are
completely off after being fully charged.

«
...
10
11
12
13
14
»

Summary of Contents for 23802















Reviews:

No comments

Related manuals for 23802

Brand: Challenge Xtreme Pages: 22

SpectraLink 8002 Series

Brand: Polycom Pages: 72

Brand: Meister Pages: 82

Brand: DBK Pages: 32

Brand: AT&T Pages: 7

Brand: Uniden Pages: 36

Brand: Rikon Power Tools Pages: 44

Brand: Spitznas Pages: 18

Brand: Diamond Products Pages: 44

Brand: Evolution Pages: 44

FortiFone FON-870i

Brand: Fortinet Pages: 21

Brand: EINHELL Pages: 200

Brand: Huvema Pages: 33

Brand: DeWalt Pages: 40

DSX CORDLESS LITE II

Brand: NEC Pages: 82

Brand: NEC Pages: 74

Brand: NEC Pages: 59

Brand: NEC Pages: 106

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands