8 Port /16 Port /24 Port/32 Port
User Manual
- 48 -
Notes
:
1.
The output image extension file name has to be ‘iso’, e.g. CD-Rom_vir.iso.
2.
You may create an ISO image size up to 650Mb (for CD-ROM). This drive
would be in read-only mode and would not allow you to write any information on this
drive but copying only. This drive would be bootable under DOS mode if the
motherboard/BIOS on the host computer support USB BOOTABLE function. For
emulating DVD Drive, please use
Drive Redirection
function.
3.
The above information has to be given from the point of view of IP-KVM with
correct IP address and device name. Administrative permission is required as regular
user may not have the right to access. Please login as a system administrator (or as
“root” on UNIX systems).
4.
The specified image file is supposed to be accessible from the IP-KVM. The
information above has to be given from the point of view of the IP-KVM. It is
important to specify correct IP addresses, and device names. Otherwise, IP-KVM
may not be able to access the referenced image file properly; leave the given file
unmounted and will display an according error message, instead. So, we
recommend to state correct values and repeat this steps if necessary.
5.
Furthermore, the specified share has to be configured correctly. Therefore,
administrative permissions are required. As a regular user you may not have these
permissions. You should either login as a system administrator (or as “root” on UNIX
systems), or ask your system administrator for help to complete this task.
Operation Procedures:
1. Please run Nero or any CD/DVD imaging tool to create CD/DVD ISO image.
2. Please create a folder and share this folder
in the PC that shares out the image
file
. Copy the CD/DVD ISO image file to this sharing folder. (Please make sure
password has to be setup with the authorized user during Sharing => Permission
settings)
MS Windows
Open the Explorer, navigate to the directory (or share) and press the right mouse
button to open the context menu. Select
Sharing
to open the configuration dialog
Summary of Contents for DL2908i
