8 Port /16 Port User Manual
-
4
-
LED Instructions
3-1.1 front view
Table 3-1.1 LED instructions
LED OSD Configuration
The LED OSD allows you to set up and configure the LED display.
Buttons
Functions
MENU SELECT
Opens the menu function and brings up the main menu.
EXIT/AUTO
Press this button exits the current menu and return to the previous
menu or press this button exits the LED OSD.
Press AUTO for automatic configuration.
SL-/SL+
Moves your menu to make corresponding adjustment.
LED state
Green :running
Red :power off or access nonstandard VESA signal
Flash green
：
energy saving mode or no signal
Table 3-1.2 LED OSD configuration instruction
Press AUTO if the screen migrates after power on or under other circumstances, then
the screen auto configure to its best display state.(It might can’t be adjusted to its best
state if part of the display mode is not standard VESA mode, if so return back to OSD
menu to RESET, then it will back to normal.
We suggest our customers to set up the display mode at 1280x1024, refresh rate at
60Hz.
No.
Components
Function
1
1-8 or
1-16
1) Switching freely from port 1 to port 8 /16
2
Port Selection
Buttons& LEDs
1
）
An online LED light(green) indicates that the KVM has
connected to its corresponding computer and power on.
2
）
A selected LED light(orange) indicates that the
computer attached to its corresponding port is up and
running.
3
Station ID
Display the current port
