jack type, and location of jack and vehicle support stands areas on vehicle. The working load limit of
these vehicle support stands is 3000 kg. NEVER EXCEED WORKING LOAD LIMIT.
3.) Clear children and others from work area before moving or lifting vehicle. Another adult should be
nearby for extra safety and assistance but must be clear of vehicle as it is moved or lifted.
4.) No person should remain in a vehicle that is being lifted by a jack or supported by vehicle support stands,
No person should enter a vehicle which is supported by a jack or by vehicle support stands. No person
should lean into a vehicle which is supported by a jack or by vehicle support stands.
5.) Clear obstructions from work area. Working in tight or cluttered work areas is dangerous.
6.) Be sure vehicle support stands and vehicle are on solid, level ground such as paved or concrete driveway
or garage floor. USE VEHICLE SUPPORT STANDS ON HARD LEVEL SURFACE PREFERABLE
CONCRETE. Uneven or sloped surfaces create hazardous working conditions and dangerously
impeded the function of the vehicle support stands.
7.) With vehicle in proper position, set vehicle’s parking brake or emergency brake and put gearshift in park
(manual transmissions should be placed in lowest gear). TURN VEHICLE IGNITION OFF AND TO THE
“LOCK” POSITION making sure steering wheel locks.
8.) Do not rely on vehicle transmission or brakes to hold vehicle in position. CHOCK THE UNLIFTED
WHEELS OF THE VEHICLE. Chock any wheel not being lifted off the ground to prevent vehicle rolling.
Using wedge-shaped blocks that tyre cannot
r
oll over, position one chock tight against the tyre in both
forward and reverse rolling paths.
9.) Vehicle support stands must be used to support vehicle once it is in raised position. USE VEHICLE
SUPPORT STANDS IN PAIRS. Have vehicle support stands capable of supporting vehicle weight ready
nearby for use. Read and understand vehicle support stands manufacturer’s instructions and safety
information before use and before lifting the vehicle with this jack.
10.) Plan location of jack and vehicle support stands beneath vehicle, making sure jack will be contacting
only a jack support area of vehicle and jacks stands are also positioned in a recommended jack support
area. Consult vehicle owner’s manual for location of jack support areas.
Lifting Vehicle
Lifting a vehicle using a jack can be dangerous. Follow all instructions and precautions provided by the jack
manufacturer. Do not lift any vehicle with its engine running or start any vehicle that is supported by jack or
vehicle support stands.
1.) With lifting arm completely lowered, roll jack into position beneath jack support area of vehicle.
2.) Inspect position of lifting saddle beneath support area, making sure it is centered and properly engaging
support area.
3.) Use jack until vehicle is lifted to desired height. Pay attention to lifting saddle position as vehicle is being
raised to be sure there is no danger of jack support area slipping off or lifting from the saddle.
4.) Place vehicle support stands under additional vehicle support areas. ALWAYS USE VEHICLE SUPPORT
STANDS IN PAIRS
5.) Ensure vehicle support stand locking mechanism is fully engaged.
6.) Do not extend the height of the stand beyond its maximum height
7.) Check that no part of the underbody of the vehicle will foul as the vehicle is positioned on the stands
