Assembly Instructions
1
1
3
5
4
3
2
4
5
CHEST & TROLLEY COMBINATION
TO PLACE CHEST ON CABINET
When securing the Top Chest and Bottom Roller
Cabinet together, remove the liner so that the
chest bottom will fit tightly into the recessed area
of cabinet. This will help prevent the chest from
slipping or tipping over.
TO INSTALL CASTORS
Estimated assembly time: 20 minutes
Tools required for assembly: Hex Key Wrench
(included)
1. Lay the tool chest on its back when
installing castors
2. Using the hex key wrench provided, install the
2 rigid castors on the bottom of the chest as
shown below
3. Follow the same procedure to install the 2
swivel castors on the opposite side.
CAUTION
For your safety, DO NOT install castors by yourself.
Installing the Castors requires TWO PEOPLE due to
having to lay the tool trolley on its back and to stand
it up once the castors are installed. Failure to follow
this warning may result in personal injury and
damage to the tool trolley.
COVER ASSEMBLY
TO ASSEMBLE COVERS
When using both covers for the Top Chest and
Bottom Roller Cabinet, zip the two covers together
to create one cover. Otherwise the covers can be
used individually.
To unzip the cover top of bottom cover
To zip the top cover and bottom cover up
To place cover over the rolling chest.
K7308
TOOL TROLLEY
11 DRAWER
2
Unzip cover top
Cover top
Bottom cover
Top cover
Bottom cover
Zip up top and
bottom cover
2
