background image

15L WET & DRY SHED VAC

8

STORAGE OF THE WET & DRY VACUUM

 WARNING!:

 ENSURE THE TOOL IS DISCONNECTED FROM THE POWER SUPPLY BEFORE CLEANING OR MAINTAINING 

THE APPLIANCE.

• Always ensure that the vacuum is emptied of any debris prior to storage.
• Ensure that any liquids have been removed from the vacuum tank

 (11)

 and that the vacuum tank 

(11)

 is completely  

dry prior to storage.

• Keep the machine out of reach of children, in a stable and safe position.
• Keep children and unauthorised personnel out of the storage room.

MAINTENANCE OF THE VACUUM

WARNING!:

 ENSURE THE TOOL IS DISCONNECTED FROM THE POWER SUPPLY BEFORE CLEANING 

OR MAINTAINING THE APPLIANCE.

• Regularly clean the vacuum filters to prolong the life of your product. Cleaning of the vacuum filters can be achieved by tapping/

knocking the filter inside your garbage bin to release the dust/debris from the filter material and/or use compressed air to blow 
the dust debris out of the filter. (always ensure you are wearing the correct personal protection equipment PPE) when cleaning 
the  vacuum filters. Also always consider your surroundings and other persons within your work area when cleaning your 
vacuum filters.

• Clean any dust or debris from around the vacuum filter basket

 (15) 

on a regular basis to prevent debris from being sucked into 

the motor head

(12)

.

• Immediately replace any damaged vacuum filters.
• Never attempt to lubricate any motor components of the vacuum.

Summary of Contents for KP701










Reviews: