Step 1
Step 2
To Operate Activity Time:
Press the MODE button until the word Act time appears on the right ( i.e., 00:00:00, representing hours,
minutes and seconds.) Activity Time is designed to calculate your total movement time, so it will record ONLY
when you are moving. To clear, press and hold the RESET button. (Pressing reset will reset both the step
count and activity time).
Battery Conservation:
Kinetic Fit Works™ pedometers have a “green mode” to preserve battery life. If the pedometer is inactive
for 3 minutes, it will turn off and show a blank display. To turn the display on, walk or move the pedometer
and it will resume counting. No data is lost when the pedometer is in the “sleep” mode.
How to Replace Battery:
(Battery Type CR2032)
Please refer to the following diagram to replace the battery.
Caring for your Pedometer:
- Avoid dropping or crushing, which could break the crystal.
- Kinetic Fit Works™ Pedometers are not waterproof and shouldn’t be exposed to water or excessive moisture.
- Avoid forcing the pedometer clip onto belt or pant waist, which could cause the clip to break.
- Change the battery when the digital display becomes faded or blank.
Page 2
1981 Wiesbrook Dr
Unit D
Oswego IL 60543
P:630-340-5168
F:815-439-2414
www.kineticfitworks.com
