INTRODUCTION &
INSTALLATION CONSIDERATIONS
INTRODUCTION
If you experience a power failure, this Generator Home Connection Kit will allow you to run
a portable generator safely OUTDOORS, to keep dangerous exhaust fumes out of your
home, and conveniently connect appliances INDOORS.
This kit transfers the 15 Amp. outlets on your portable generator indoors, to power lights,
refrigerator, freezer, microwave, sump pump and other appliances. The indoor power
outlet panel comes with LED indicators lights when the generator is connected and is
running outdoors, offering some light to see what you are doing.
NOT INCLUDED
It is important to note that a portable generator and a 30 Amp. 125/250VAC L14-30
generator cord are not included, and must be purchased.
INSTALLATION CONSIDERATIONS- LOCATION
BEFORE INSTALLATION. We recommended that you check if a permit is required for this
type of installation.
LOCATION- INSIDE
Choose a convenient location for the indoor power panel, we recommended that the
location be 19”-20” from the floor. Installation should be between wall studs, make sure to
avoid all electrical outlet wiring or water pipes. Once you have chosen a convenient
location, measure and mark the spot. This mark will become the centre position of the
indoor power panel.
LOCATION- OUTSIDE
Try to figure out the location on your outside wall directly opposite the location of the indoor
power panel. Make sure that location doesn’t interfere with outside cabling, pipes, bushes,
etc.
