ASSEMBLY
ASSEMBLING LOG SPLITTER ONTO STAND
5) With the help of a second person, lift the Log Splitter and position the front bracket over
the top of the front vertical support column as shown in Fig.4. Secure the brackets
together using 4 hex. bolts, washers, spring washers and hex. nuts.
6) Before securing the front bracket in previous step, lift the rear of the Log Splitter and
insert the two rear vertical support columns (Part#9) into the wheel support beam
(Part#8). Secure each rear vertical support columns using a hex. bolt (Part#6).
7) Make sure all hardware is tightened before attempting to move Log Splitter.
FIGURE 4
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.
