1. Turn on TV and Receiver. “Searching for Satellite” or similar will appear on TV screen.
2. On King Dome controller, press and hold
ON/SEARCH for
4 SECONDS
. Power light
turns steady GREEN.
Page 12
a)
flashes a variety of colors
for about one minute
b)
blinks RED
c)
blinks GREEN (may start
blinking RED again)
d)
turns steady Green
unit performs
self-diagnostic
search in progress
potential satellite
found
satellite found
IMPORTANT! There must be a clear “line of sight” to the southern sky. Mountains,
buildings, trees, telephone poles, etc. can all block the satellite signal
from reaching the dish.
The distance driven since last preforming a search may affect how long it
takes for the King Dome to find the satellite.
Satellite TV and receiver technology are constantly changing. If you
experience difficulty go to www.kingcontrols.com or contact the King
Controls Service Department at (800) 982-9920.
SECTION 4
OPERATION
STATUS LIGHT
SYSTEM STATUS
Hand Held
Controller
Wall Mount
Controller
KING-DOME
King Controls
KING-DOME
ON/SEARCH
STATUS
OFF
SWITCH
SATELLITE
KING-DOME
King Controls
KING-DOME
ON/SEARCH
STATUS
OFF
SWITCH
SATELLITE
KING-DOME
King Controls
KING-DOME
ON/SEARCH
STATUS
OFF
SWITCH
SATELLITE
3. Can you view your desired programming?
YES
: Turn King-Dome off and enjoy.
NO
: Press the ON/SEARCH button for one
second to continue search. Repeat
step until you are locked onto the
correct satellite.
Note: Receiver may require 2 minutes to
download program information.
IMPORTANT! Do not turn off the
controller until you have
found your desired
satellite and programming.